Last Updated: October 2017

 

Please read these Terms of Use (the “Agreement“) carefully. Your use of the Micro Logic Online Properties (as defined below) constitutes your consent to this Agreement.

 

This Agreement is between you and Micro Logic,(“Micro Logic” or “we“) concerning your use of (including any access to) the websites currently located at http://micrologic.ca and any other websites that we own and control and which contain a link to this Agreement(together with any materials and services available therein, and successor site(s) thereto, the “Sites”), and the mobile software applications currently entitled “Micro Logic” and any other mobile applications that we own and control and which contain a link to this Agreement (together with any materials and services available therein, and successor applications(s) thereto, the “Apps”). The Sites and Apps are referred to collectively in this Agreement as the “Micro Logic Online Properties“.

 

This Agreement hereby incorporates by this reference any additional terms and conditions posted by Micro Logic through the Micro Logic Online Properties, or otherwise made available to you by Micro Logic. Your use of the Micro Logic Online Properties is governed by this Agreement regardless of how you access the Micro Logic Online Properties, including through the Internet, through Wireless Access Protocol (commonly referred to as “WAP”), through a mobile network or otherwise.

 

BY USING THE MICRO LOGIC ONLINE PROPERTIES, YOU AFFIRM THAT YOU ARE OF LEGAL AGE TO ENTER INTO THIS AGREEMENT. IF YOU ARE USING THE MICRO LOGIC ONLINE PROPERTIES ON BEHALF OF A COMPANY OR OTHER ORGANIZATION, THEN YOU ARE ENTERING INTO THIS AGREEMENT ON BEHALF OF YOURSELF AND SUCH ORGANIZATION, AND YOU REPRESENT THAT YOU HAVE THE LEGAL AUTHORITY TO BIND SUCH ORGANIZATION TO THIS AGREEMENT.

 

  1. Changes. We may change this Agreement by notifying you of such changes by any reasonable means, including by posting a revised Agreement through the Micro Logic Online Properties. Any such changes will become effective on the “Last Updated” date indicated above and those revised terms will not apply to any dispute between you and us arising prior to such date on which the revised Agreement incorporating such changes became effective, or on which we otherwise notified you of such changes.

 

Your use of the Micro Logic Online Properties following any changes to this Agreement will constitute your acceptance of such changes. The “Last Updated” legend above indicates when this Agreement was last changed. We may, at any time and without liability, modify or discontinue all or part of the Micro Logic Online Properties (including access via any third-party links); charge, modify or waive any fees required to use the Micro Logic Online Properties; or offer opportunities to some or all users.

 

  1. Information Submitted Through the Micro Logic Online Properties. Your submission of information through the Micro Logic Online Properties is governed by Micro Logic’s Privacy Policy, located at http://www.micrologic.ca/privacy-policy/ (the “Privacy Policy”). You represent and warrant that any information you provide in connection with the Micro Logic Online Properties is and will remain accurate and complete, and that you will maintain and update such information as needed.

 

  1. Jurisdictional Issues. The Micro Logic Online Properties are controlled or operated (or both) from Canada, and are not intended to subject Micro Logic to any non-Canadian jurisdiction or law. The Micro Logic Online Properties may not be appropriate or available for use in some non-Canadian jurisdictions. Any use of the Micro Logic Online Properties is at your own risk, and you must comply with all applicable laws, rules and regulations in doing so. We may limit the Micro Logic Online Properties’ availability at any time, in whole or in part, to any person, geographic area or jurisdiction that we choose.

 

  1. Products. The Micro Logic Online Properties may make available listings, descriptions and images of goods or services or related coupons or discounts (collectively, “Products”), as well as references and links to Products. Such Products may be made available by Micro Logic or by third parties. The availability through the Micro Logic Online Properties of any listing, description or image of a third-party Product does not imply our endorsement of such Product or affiliation with the provider of such Product. We make no representations as to the completeness, accuracy or timeliness of such listings, descriptions or images (including any features, specifications and prices contained therein). Such information and the availability of any Product (including the validity of any coupon or discount) is subject to change at any time without notice. Certain weights, measures and similar descriptions are approximate and are for convenience only. We make reasonable efforts to accurately display the attributes of Products, including the applicable colors and patterns, however the actual colors and patterns you see will depend, amongst others, on your computer system and the natural variation that may occur in our products, and we cannot guarantee that your computer will accurately display such colors nor that the colors and patterns displayed will be consistently identical in the available product at the time of any transaction, being understood that most of Micro Logic’s Products are made of, or include, natural stone and other natural products which may, in their essence, vary in colors and patterns. It is your responsibility to ascertain and obey all applicable local, state, federal and foreign laws (including minimum age requirements) regarding the possession, use and sale of any Product.

 

  1. Transactions. We may make available the ability to purchase or otherwise obtain certain Products through the Micro Logic Online Properties or through other sales channels such as telephone orders, mail orders or our physical stores (a “Transaction”). If you wish to make a Transaction, you may be asked to supply certain relevant information, such as your credit card number and its expiration date, your billing address and your shipping information. YOU REPRESENT AND WARRANT THAT YOU HAVE THE RIGHT TO USE ANY CREDIT CARD THAT YOU SUBMIT IN CONNECTION WITH A TRANSACTION. By submitting such information, you grant to us the right to provide such information to third parties for purposes of facilitating Transactions. Verification of information may be required prior to the acknowledgment or completion of any Transaction. You agree to pay all charges incurred by you or on your behalf through the Micro Logic Online Properties, at the prices in effect when such charges are incurred, including all shipping and handling charges. In addition, you are responsible for any taxes applicable to your Transactions. While it is our practice to confirm orders by email, the receipt of an email order confirmation does not constitute our acceptance of an order or our confirmation of an offer to sell a product or service.

 

Restrictions. Micro Logic reserves the right, including without prior notice, to limit the available quantity of or discontinue making available any Product; to impose conditions on the honouring of any coupon, discount or similar promotion; to bar any user from making any Transaction; and to refuse to provide any user with any Product. By making a Transaction, you represent that the applicable Products will be used only in a lawful manner. You agree that you will not resell any products or services obtained through a Transaction, unless we have provided our express prior written consent for you to do so.

 

Refunds & Exchanges. Refunds and exchanges will be subject to Micro Logic’s applicable refund and exchange policies.

 

Shipping. Micro Logic offers shipping services subject to Micro Logic’s applicable shipping policies.

 

Trade Customers; Contract Customers. In addition to this Agreement, other general or specific terms and conditions may apply to you and your Transactions; such additional terms and conditions are generally made available in the course of negotiation of the Transactions, or simultaneously with the conclusion of any specific agreement in connection with a specific Transaction.

To the extent of any conflict between the terms and conditions of this Agreement and those of the Trade Terms & Conditions or the Contract Terms & Conditions, those of the Trade Terms & Conditions and the Contract Terms & Conditions will govern.

 

  1. Registration; User Names and Passwords You may need to register to use all or part of any Micro Logic Online Property. We may reject, or require that you change, any user name, password or other information that you provide to us in registering. Your user name and password are for your personal use only and should be kept confidential; you, and not Micro Logic, are responsible for any use or misuse of your user name or password, and you must promptly notify us of any confidentiality breach or unauthorized use of your user name, password or account for any Micro Logic Online Property.

 

  1. Rules of Conduct. In connection with the Micro Logic Online Properties, you must not:

 

(a) threatening, harassing, degrading, hateful or intimidating, or otherwise fail to respect the rights and dignity of others; (b) defamatory, libellous, fraudulent or otherwise tortious; (c) obscene, indecent, pornographic or otherwise objectionable; (d) protected by copyright, trademark, trade secret, right of publicity or privacy or any other proprietary right, without the express prior written consent of the applicable owner; or (e) otherwise unlawful or illegal.

 

 

 

 

 

 

 

 

 

 

 

 

You are responsible for obtaining, maintaining and paying for all hardware and all telecommunications and other services needed to use the Micro Logic Online Properties.

 

  1. Limited License. Subject to your compliance with this Agreement, and solely for so long as you are permitted by Micro Logic to use the Sites, you may view one (1) copy of any portion of the Sites to which we provide you access hereunder, on any single device, solely for your personal, non-commercial use. The Apps are licensed (not sold) to end users. Subject to your compliance with this Agreement, and solely for so long as you are permitted by Micro Logic to use the Apps, we hereby permit you, on a limited, non-exclusive, revocable, non-transferable, non-sublicensable basis, to install and use the Apps on a mobile device that you own or control.

 

  1. Micro Logic’s Proprietary Rights We and our suppliers own the Sites and Apps, which are protected by proprietary rights and laws. If you fail to comply with any of the terms or conditions of this Agreement, you must immediately cease using the Apps and remove (that is, uninstall and delete) the Apps from your mobile device. Our trade names, trademarks and service marks, among others, include Micro Logic and any associated logos. All trade names, trademarks, service marks and logos on the Micro Logic Online Properties not owned by us are the property of their respective owners. You may not use our trade names, trademarks, service marks or logos in connection with any product or service that is not ours, or in any manner that is likely to cause confusion. Nothing contained on the Micro Logic Online Properties should be construed as granting any right to use any trade names, trademarks, service marks or logos without the express prior written consent of the owner.

 

  1. Third Party Materials; Links. Certain functionalities of the Micro Logic Online Properties may make available access to materials made available by third parties (“Third Party Materials”), or allow for the routing or transmission of such Third Party Materials, including via links. By using such functionalities, you are directing us to access, route and transmit to you the applicable Third Party Materials. We neither control nor endorse, nor are we responsible for, any Third Party Materials, including the accuracy, integrity, quality, legality, usefulness or safety of Third Party Materials, or any intellectual property rights therein. Certain Third Party Materials may, among other things, be inaccurate, misleading or deceptive. Nothing in this Agreement shall be deemed to be a representation or warranty by Micro Logic with respect to any Third Party Materials. We have no obligation to monitor Third Party Materials, and we may block or disable access to any Third Party Materials (in whole or part) through the Micro Logic Online Properties at any time. In addition, the availability of any Third Party Materials through the Micro Logic Online Properties does not imply our endorsement of, or our affiliation with, any provider of such Third Party Materials, nor does such availability create any legal relationship between you and any such provider.

 

YOUR USE OF THIRD PARTY MATERIALS IS AT YOUR OWN RISK AND IS SUBJECT TO ANY ADDITIONAL TERMS, CONDITIONS AND POLICIES APPLICABLE TO SUCH THIRD PARTY MATERIALS (SUCH AS TERMS OF SERVICE OR PRIVACY POLICIES OF THE PROVIDERS OF SUCH THIRD PARTY MATERIALS).

 

  1. Promotions. Any sweepstakes, contests, raffles, surveys, games or similar promotions (collectively, “Promotions”) made available through the Micro Logic Online Properties may be governed by rules that are separate from this Agreement. If you participate in any Promotions, please review the applicable rules as well as our Privacy Policy. If the rules for a Promotion conflict with this Agreement, the Promotion rules will govern. Micro Logic may, at its sole discretion, restrict the access to any such Promotions in specific geographical areas.

 

  1. DISCLAIMER OF WARRANTIES. THE MICRO LOGIC ONLINE PROPERTIES AND ANY PRODUCTS AND THIRD PARTY MATERIALS ARE MADE AVAILABLE TO YOU “AS IS” WITHOUT ANY WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY. MICRO LOGIC DISCLAIMS ALL WARRANTIES WITH RESPECT TO THE MICRO LOGIC ONLINE PROPERTIES AND ANY PRODUCTS AND THIRD PARTY MATERIALS TO THE FULLEST EXTENT PERMISSIBLE UNDER APPLICABLE LAW, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND TITLE. THIS SECTION 12 DOES NOT AFFECT ANY EXPRESS WARRANTIES THAT WE MAY PROVIDE DIRECTLY TO YOU IN WRITING WITH RESPECT TO PRODUCTS PURCHASED THROUGH THE MICRO LOGIC ONLINE PROPERTIES.

ALL DISCLAIMERS OF ANY KIND (INCLUDING IN THIS SECTION AND ELSEWHERE IN THIS AGREEMENT) ARE MADE ON BEHALF OF BOTH MICRO LOGIC AND ITS AFFILIATES AND THEIR RESPECTIVE SHAREHOLDERS, DIRECTORS, OFFICERS, EMPLOYEES, AFFILIATES, AGENTS, REPRESENTATIVES, LICENSORS, SUPPLIERS AND SERVICE PROVIDERS (COLLECTIVELY, THE “AFFILIATED ENTITIES”).

 

While we try to maintain the timeliness, integrity and security of the Micro Logic Online Properties, we do not guarantee that the Micro Logic Online Properties are or will remain updated, complete, correct or secure, or that access to the Micro Logic Online Properties will be uninterrupted. The Micro Logic Online Properties may include inaccuracies, errors and materials that violate or conflict with this Agreement. Additionally, third parties may make unauthorized alterations to the Micro Logic Online Properties. If you become aware of any such alteration, please contact us by visiting http://www.micrologic.ca/contact-us/ and providing a description of such alteration and its location.

 

  1. LIMITATION OF LIABILITY. MICRO LOGIC WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY OR PUNITIVE DAMAGES OF ANY KIND, UNDER ANY CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY, INCLUDING DAMAGES FOR LOSS OF PROFITS, USE OF DATA, LOSS OF OTHER INTANGIBLES, LOSS OF SECURITY OF INFORMATION TRANSMITTED VIA THE MICRO LOGIC ONLINE PROPERTIES (INCLUDING UNAUTHORIZED INTERCEPTION BY THIRD PARTIES OF SUCH INFORMATION), EVEN IF ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. WITHOUT LIMITING THE FOREGOING, MICRO LOGIC WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM YOUR USE OF OR INABILITY TO USE THE MICRO LOGIC ONLINE PROPERTIES OR FROM ANY PRODUCTS OR THIRD PARTY MATERIALS. YOUR SOLE AND EXCLUSIVE REMEDY FOR DISSATISFACTION WITH THE MICRO LOGIC ONLINE PROPERTIES OR ANY PRODUCTS OR THIRD PARTY MATERIALS IS TO STOP USING THE MICRO LOGIC ONLINE PROPERTIES. THE MAXIMUM AGGREGATE LIABILITY OF RESTORATION HARDWARE FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL BE THE GREATER OF: (A) THE TOTAL AMOUNT, IF ANY, PAID BY YOU TO RESTORATION HARDWARE TO USE THE MICRO LOGIC ONLINE PROPERTIES; AND (B) TEN CANADIAN DOLLARS ($10). ALL LIMITATIONS OF LIABILITY OF ANY KIND (INCLUDING IN THIS SECTION AND ELSEWHERE IN THIS AGREEMENT) ARE MADE ON BEHALF OF BOTH RESTORATION HARDWARE AND THE AFFILIATED ENTITIES.

 

Applicable law may not allow for limitations on certain implied warranties, or exclusions or limitations of certain damages; solely to the extent that such law applies to you, some or all of the above disclaimers, exclusions or limitations may not apply to you, and you may have certain additional rights.

 

  1. Indemnity. Except to the extent prohibited under applicable law, you agree to defend, indemnify and hold harmless Micro Logic and the Affiliated Entities from and against all claims, losses, costs and expenses (including attorneys’ fees) arising out of (a) your use of, or activities in connection with, any of the Micro Logic Online Properties; and (b) any violation or alleged violation of this Agreement by you.

 

  1. Termination. This Agreement is effective until terminated. Micro Logic may terminate or suspend your use of any or all of the Micro Logic Online Properties at any time and without prior notice, including if Micro Logic believes that you have violated or acted inconsistently with the letter or spirit of this Agreement. Upon any such termination or suspension, your right to use the Micro Logic Online Properties will immediately cease, and Micro Logic may, without liability to you or any third party, immediately deactivate or delete your user name, password and account(s), and all associated materials, without any obligation to provide any further access to such materials.

 

  1. Governing Law; Arbitration The terms of this Agreement are governed by the laws of the province of Quebec, and the federal laws of Canada applicable therein, without regard to its principles of conflicts of law, and regardless of your location. EXCEPT FOR DISPUTES THAT QUALIFY FOR SMALL CLAIMS COURT, ALL DISPUTES ARISING OUT OF OR RELATED TO THIS AGREEMENT OR ANY ASPECT OF THE RELATIONSHIP BETWEEN YOU AND RESTORATION HARDWARE, WHETHER BASED IN CONTRACT, TORT, STATUTE, FRAUD, MISREPRESENTATION OR ANY OTHER LEGAL THEORY, WILL BE RESOLVED THROUGH FINAL AND BINDING ARBITRATION BEFORE A NEUTRAL ARBITRATOR INSTEAD OF IN A COURT BY A JUDGE. YOU AGREE THAT ANY ARBITRATION UNDER THIS AGREEMENT WILL TAKE PLACE ON AN INDIVIDUAL BASIS; CLASS ARBITRATIONS AND CLASS ACTIONS ARE NOT PERMITTED AND YOU AGREE TO GIVE UP THE ABILITY TO PARTICIPATE IN A CLASS ACTION. The arbitration will be governed by, and administered in compliance with, the Civil Code of Quebec and the Quebec Code of Civil Procedure as amended by this Agreement. The arbitrator will conduct hearings, if any, by teleconference or videoconference, rather than by personal appearances, unless the arbitrator determines upon request by you or by us that an in-person hearing is appropriate. Any in-person appearances will be held at a location which is reasonably convenient to both parties, in Quebec City. If the parties are unable to agree on a location, such determination should be made by the arbitrator. The arbitrator’s decision will follow the terms of this Agreement and will be final and binding. The arbitrator will have authority to award temporary, interim or permanent injunctive relief or relief providing for specific performance of this Agreement, but only to the extent necessary to provide relief warranted by the individual claim before the arbitrator. The award rendered by the arbitrator may be confirmed and enforced in any court having jurisdiction thereof. Notwithstanding any of the foregoing, nothing in this Agreement will preclude you from bringing issues to the attention of federal, state or local agencies and, if the law allows, they can seek relief against us for you. Any arbitration procedure, including any evidence, document or correspondence in connection therewith, and any arbitral decision shall be and remain strictly confidential.

 

  1. Filtering. We hereby notify you that parental control protections (such as computer hardware, software or filtering services) are commercially available that may assist you in limiting access to material that is harmful to minors. Information identifying current providers of such protections is available from GetNetWise (http://kids.getnetwise.org/) and OnGuard Online (http://onguardonline.gov/). Please note that Micro Logic does not endorse any of the products or services listed on such sites.

 

  1. Information or Complaints. If you have a question or complaint regarding any of the Micro Logic Online Properties, please contact us by visiting http://www.micrologic.ca/contact-us/. You may also contact us by writing to Micro Logic, Attn: Customer Service, 2786 chemin Sainte-Foy, Quebec City (Quebec) Canada G1V 1V8, or by calling us at 1 418 658-6624. Please note that email communications will not necessarily be secure; accordingly you should not include credit card information or other sensitive information in your email correspondence with us.

 

  1. Export Controls. You are responsible for complying with applicable export controls and for any violation of such controls, including any embargoes or other rules and regulations restricting exports. You represent, warrant and covenant that you are not (a) located in, or a resident or a national of, any country subject to a U.S. or Canadian government embargo or other restriction, or that has been designated by the U.S. or Canadian government as a “terrorist supporting” country; (b) on any of the U.S. or Canadian government lists of restricted end users.

 

  1. Miscellaneous. This Agreement does not, and shall not be construed to, create any partnership, joint venture, employer-employee, agency or franchisor-franchisee relationship between you and Micro Logic If any provision of this Agreement is found to be unlawful, void or for any reason unenforceable, that provision will be deemed severable from this Agreement and will not affect the validity and enforceability of any remaining provision. You may not assign, transfer or sublicense any or all of your rights or obligations under this Agreement without our express prior written consent. We may assign, transfer or sublicense any or all of our rights or obligations under this Agreement without restriction. No waiver by either party of any breach or default hereunder will be deemed to be a waiver of any preceding or subsequent breach or default. Any heading, caption or section title contained herein is for convenience only, and in no way defines or explains any section or provision. All terms defined in the singular shall have the same meanings when used in the plural, where appropriate and unless otherwise specified. Any use of the term “including” or variations thereof in this Agreement shall be construed as if followed by the phrase “without limitation.” This Agreement, including any terms and conditions incorporated herein, is the entire agreement between you and Micro Logic relating to the subject matter hereof, and supersedes any and all prior or contemporaneous written or oral agreements or understandings between you and Micro Logic relating to such subject matter. Notices to you (including notices of changes to this Agreement) may be made via posting to the Micro Logic Online Properties or by email (including in each case via links), or by regular mail. Without limitation, a printed version of this Agreement and of any notice given in electronic form shall be admissible in judicial or administrative proceedings based upon or relating to this Agreement to the same extent and subject to the same conditions as other business documents and records originally generated and maintained in printed form. Micro Logic will not be responsible for any failure to fulfill any obligation due to any cause beyond its control.

 

My need:

Close

EN - Parler à un expert

  • Please fill in the following information:
  • (You can check several choices.)
  • This field is for validation purposes and should be left unchanged.

Téléchargez notre profil d'entreprise

Close

Téléchargez notre profil d'entreprise

  • Veuillez fournir les informations suivantes afin d'avoir accès au téléchargement :
  • This field is for validation purposes and should be left unchanged.
fr